PRODUCTS SERIES      
Features of Auger Type Metering Machine
SM-01
Semi-auto Auger Type Powder Metering Filling Machine (Small Model)
SM-2001
Semi-auto Auger Type Powder Metering Filling Machine (Floor Model)
SM-2002
Semi-auto Auger Type Powder Metering Filling Machine (Bench Model)
SM-2101
Automatic Auger Type Bottle / Can Metering Filling Machine
SM-2202
Semi-auto Auger Type Weighing Filling Machine
STS-01, STS-01-L
Automatic Bag Forming Filling Metering Packaging Machine (Small Package)
STS-01-LQ
Automatic Bag Forming Filling Metering Packaging Machine (Liquid Small Package)
TS-2435, TS-1625
Automatic Bag Forming Filling Metering Packaging Machine (Big Package)
SM-02
Semi-auto Weighing Filling Machine
SM-2102
Automatic Powder Filling Plugging and Cap Sealing Machine (Small Volume)
SM-2203
Automatic Bag Forming Electronic Weighing Filling Packaging Machine
SM-300
Automatic Rotary Type Auger Metering Filling Plugging and Cap Sealing Machine
SM-400
Automatic Multi-head Auger Type Filling Metering Machine


 

STS-01-LQ Automatic Bag Forming Filling Metering
Packaging Machine (Liquid Small Package)

APPLICABLE PRODUCTS:

  • Designed for automatic bag forming filling and packaging for various liquid and paste bags (Small package) and handy bags.

FEATURES:

  • The STS-01-LQ automatic bag forming filling metering packaging machine is suitable for packaging all types of liquid and paste.
     

  • The machine is designed with a gusset type sealing mechanism, ensuring smooth appearance of product without pin-hole problem. No material exists at sealing position that assures superior tightness of sealing.
     

  • Printing points photocell sensor is easy to adjust to eliminate waste of packaging film. Simply input packaging length in case of no printing points photocell sensor.
     

  • Minimum sealing temperature variation. Employ PID calculation to maintain temperature tolerance within ±2°C.
     

  • Product types and weights can be memorized for added convenience of management.



 
  • The transmission system is driven by a servo motor (Mitsubishi from Japan) for high accuracy.
     

  • Filling system employs a mono-screw pump.
     

  • Spindle material: manufactured from SILICONE.
     

  • Pump body material: All surface that contact with material and manufactured from stainless steel.
     

  • Heat-resistant temperature: 130°C.
     

  • External connector allows for easy dismantling for washing without need of tool.
     

  • The control system employs a touch-sensing screen for operational convenience.
     

  • All air cylinders employ Japan (SMC) standards for dependable quality.
     

  • The controller provides a self-diagnostic function. In case any machine trouble occurs, such as no packaging film, no color tape, photocell sensor error, excessive or under sealing temperature or air pressure failure etc, the machine will stop automatically. The screen will display problem points and trouble-shooting instructions.
     

  • The machine is available to perform perforating packaging function (Two
    or three packages perforating).

 

SPECIFICATIONS:

Machine Size L: 900mm / W: 850mm / H: 1700mm
Machine Weight 300 kg
Range of Packaging Film Size
(Product Sizes)
L: 40 - 150mm
W: 50 - 120mm
Packaging Speed 45 - 60 bags/min (Vary with filling weight)
Packaging Method 3-side sealing, 4-side sealing, 3-side back sealing
Power Required 220V, 3Ø, 7.5HP, 50/60Hz
Range of Filling and Metering 1cc - 50cc
Air Pressure 6 - 8kg/cm2

 

http://www.auger.com.tw